Toray

TM700 Series – High Rejection Brackish Water RO Elements

Model No.	Size (Dia.”× L”)	Permeate Flow		Salt Rejection (%)	Test Pressure (psi)	Membrane Area		Feed Spacer
		gpd	m³/d			(ft2)	(m2)	mil	mm
TM710	4 × 40	2,400	9.1	99.7	225	87	8	31	0.8
TM720-370	8 × 40	9,500	36.0	99.7	225	370	34	31	0.8
TM720-400	8 × 40	10,200	38.6	99.7	225	400	37	31	0.8
TM720N-400	8 × 40	10,200	38.7	99.7	225	400	37	34	0.9
TM720-440	8 × 40	11,300	42.8	99.7	225	440	41	28	0.7
TM700C – Brackish with 95% Boron Rejection  (at pH 10 & 5 ppm Feed)
TM720C-400	8 × 40	10,200	38.7	99.7	225	400	37	31	0.8
TM720C-440	8 × 40	11,300	42.8	99.7	225	440	41	28	0.7
TM700L – Low Pressure High Rejection Brackish
TM720L-400	8 × 40	8,500	32.2	99.5	225	400	37	28	0.7
TM720L-440	8 × 40	9,200	34.8	99.5	225	440	41	28	0.7

Test Conditions:  2,000 mg/l NaCl solution at 225 psi (1.55 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.  Minimum Salt Rejection is 99%.

TMG Series – Low Pressure Brackish Water RO Elements

Model No.	Size (Dia.”× L”)	Permeate Flow		Salt Rejection (%)	Test Pressure (psi)	Membrane Area		Feed Spacer
		gpd	m³/d			(ft2)	(m2)	mil	mm
TMG10	4 × 40	2,400	9.1	99.5	110	87	8	31	0.8
TMG20-400	8 × 40	10,200	38.6	99.5	110	400	37	28	0.7
TMG20-400C*	8 × 40	10,200	38.6	99.5	110	400	37	31	0.8
TMG20N-400	8 × 40	10,200	38.6	99.5	110	400	37	34	0.9
TMG20N-400C*	8 × 40	10,200	38.6	99.5	110	400	37	34	0.9
TMG20-440	8 × 40	11,300	42.8	99.5	110	440	41	28	0.7
TMG20-440C*	8 × 40	11,300	42.8	99.5	110	440	41	28	0.7

Test Conditions:  500 mg/l NaCl solution at 110 psi (0.76 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.  Minimum Salt Rejection is 99%.
*Elements ending in “C” contain 1.125” pwt.

TMH Series – Ultra Low Pressure Brackish Water RO Elements

Model No.	Size (Dia.”× L”)	Permeate Flow		Salt Rejection (%)	Test Pressure (psi)	Membrane Area		Feed Spacer
		gpd	m³/d			(ft2)	(m2)	mil	mm
TMH10A	4 × 40	2,400	9.1	99.3	100	87	8	31	0.8
TMH20A-400	8 × 40	11,000	41.6	99.3	100	400	37	28	0.7
TMH20A-440	8 × 40	11,800	44.7	99.3	100	440	41	28	0.7

Test Conditions:  500 mg/l NaCl solution at 100 psi (0.69 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.  Minimum Salt Rejection is 99%.

TML Series – Low Fouling Brackish Water RO Elements

Model No.	Size (Dia.”× L”)	Permeate Flow		Salt Rejection (%)	Test Pressure (psi)	Membrane Area		Feed Spacer
		gpd	m³/d			(ft2)	(m2)	mil	mm
TML10	4 × 40	1,850	7.0	99.7	225	73	7	34	0.9
TML10F	4 × 40	2,200	8.3	99.7	225	87	8	31	0.8
TML20-370	8 × 40	9,500	36.0	99.7	225	370	34	34	0.9
TML20N-400	8 × 40	10,200	38.6	99.7	225	400	37	34	0.9

Test Conditions:  2,000 mg/l NaCl solution at 225 psi (1.55 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 7.  Minimum Salt Rejection is 99%.

TM800 Series – Seawater Desalination RO Elements

Model No.	Size (Dia.”× L”)	Permeate Flow		Salt Rejection (%)	Test Pressure (psi)	Membrane Area		Feed Spacer
		gpd	m³/d			(ft2)	(m2)	mil	mm
TM800B – Seawater with High Pressure Capability  (Up to 1,400 PSI)
TM820B-400	8 × 40	5,600	21.2	99.75	800	400	37	31	0.8
TM800C – Seawater with 93% Boron Rejection (at pH8 & 5mg/l feed)
TM810C	4 × 40	1,200	4.5	99.75	800	73	7	31	0.8
TM820C-370	8 × 40	6,000	22.7	99.75	800	370	34	31	0.8
TM820C-400	8 × 40	6,500	24.6	99.75	800	400	37	28	0.7
TM800E – Energy Saving Seawater with 91% Boron Rejection  (at pH8 & 5mg/l feed)
TM820E-400	8 × 40	7,500	28.3	99.75	800	400	37	28	0.7
TM800F & TM800L – High Flow Seawater Elements
TM810L	4 × 40	1,900	7.2	99.70	800	73	7	28	0.7
TM810F	4 × 40	2,200	8.3	99.70	800	73	7	31	0.8
TM820F-400	8 × 40	9,000	34.1	99.70	800	400	37	28	0.7
TM800S – High Flow Seawater with 90% Boron Rejection  (at pH8 & 5mg/l feed)
TM820S-400	8 × 40	9,000	34.1	99.75	800	400	37	28	0.7

Test Conditions: 32,000 mg/l NaCl solution at 800 psi (5.52 MPa) applied pressure, 15% recovery, 77°F (25°C) and pH 8. Minimum Salt Rejection is 99.5%.