Contact us

Media filtration SIngle Metered

Hard water contains dissolved minerals in the form of Calcium (Ca), Magnesium (Mg), and Iron (Fe). Removal of these minerals is accomplished by softening the water through an ion exchange process using a water softener. As the water flows through the mineral tank of the water softener, the dissolved minerals become attached to the resin, creating soft water. Over a period of time the resin in the water softener will become exhausted, and the water softener will regenerate using a brine solution produced from the salt in the brine tank. Metered Water Softeners (or Demand Water Softeners) are prompted to regenerate based on the amount of water that has passed through the unit. Like the timered softeners, these can be programmed to regenerate at a certain time of day. Instead of regenerating on a specific day as a timered softener does, the metered softener does not schedule a regeneration until the specified amount of water have passed through the softener. These units can save water by preventing unnecessary regenerations since it does not regenerate until the resin is near its capacity.
Metered Water Softener Model No.* Flow Rate** (gpm) Back Wash Flow
(gpm)		 Volume of Resin (cu.ft.) Resin Tank
(Dia.”×H”)		 Brine Tank
(Dia.”×H”)		 Fleck Valve In/Out Conn. Approx Ship Weight
(lb)
5gpm/ft² 15gpm/ft² Softening Resin (only) Total (Incl. Underbed)
W-S744SM 1 4 1 0.50 0.60 7×44 18×33 5600 ¾” 100
W-S844SM 2 5 2 0.60 0.70 8×44 18×33 5600 ¾” 105
W-S940SM 2 6 2 0.75 0.85 9×40 18×40 5600 ¾” 115
W-S1054SM 2 7 3 1.25 1.45 10×54 18×40 5600 ¾” 150
W-S1252SM 4 12 4 1.75 2.05 12×52 18×40 2510 1″ 190
W-S1354SM 4 14 5 2.00 2.30 13×54 18×40 2510 1″ 225
W-S1465SM 5 16 6 3.00 3.50 14×65 24×41 2510 1″ 335
W-S1665SM 7 21 7 3.50 4.00 16×65 24×41 2510 1″ 385
W-S2162SM 13 36 12 6.00 7.00 21×62 30×48 2850 1.5″ 645
W-S2472SM 15 47 15 8.00 10.0 24×72 39×48 2850 1.5″ 950
W-S3072SM 24 74 25 12.5 16.5 30×72 39×48 3150 2″ 1,535
W-S3672SM 35 95 35 17.0 22.0 36×72 39×60 3150 2″ 1,950
W-S4272SM 48 144 48 23.0 30.0 42×72 42×60 3900 3″ 2,950
W-S4872SM 60 188 60 30.0 43.6 48×72 60×60 3900 3″ 4,360

Ordering Notes:

* Softeners are available with several options of valve voltages. Please add the appropriate voltage code to the end of the model when ordering.
110v/60Hz = 116 Example: W-S744SM-116
220v/60Hz = 216 Example: W-S744SM-216
220v/50Hz = 215 Example: W-S744SM-215

**5 gpm per sq. ft. of media is the best design condition for filtration. For relatively clean water, you may go up to design criteria of 15 gpm per sq. ft. Backwash flow rate based on 25 psi pressure drop.

Skid mounting, control panel and custom sizes and configurations are available upon request.

Water Softener with Optional SS Jacket Skid Mounted Commercial Water Softener Custom Industrial Media Installation
Water Softener with Optional SS Jacket Skid Mounted Commercial Water Softener Custom Industrial Media Installation